Ca200 2-Wire Smart Fire Alarm Controller for Building Safety Systems

• Customization: Available
• Type: Fire Alarm Host
• Function: Networked, Non-Networked
• Model NO.: CA200
• Usage: Fire, Smoke
• Certification: CE, CCC
• Alarm Volume (within 1m): ≥80dB
• Networking Mode: /
• Receive Frequency: /
• Wiring Mode: Non-Polarity 2 Wired
• Power Supply: AC90-270V
• Highlight: Wall Mounted Addressable Fire Alarm System, LCD
• Installation: Wall Mounted
• Number of Detectors: Max. 1524points
• Operating Environment: Temperature -10°c~+50°c Humidity ≤95%.
• Transport Package: Wall Mounted
• Specification: 400mm*500mm*125mm
• Trademark: XHA
• Origin: China
• HS Code: 8531100000
• Production Capacity: 50000pieces/Year
• Package Size: 40.00cm * 50.00cm * 12.50cm
• Package Gross Weight: 4.540kg

Product Description

CA200 Intelligent Fire Alarm Control Panel For Building Fire Safety System
Introduction
 
CA200 fire alarm controller and fire detectors and modules constitute an automatic monitoring and control system to monitor the fire smoke situation on the site, it uses intelligent algorithms to judge its status (fire alarm or fault or feedback) and accomplish automatic fire alarm and linkage function. The controller uses bus communication to set alarm, monitor and control on the same loop bus. The hardware circuit is controlled by a single chip microcomputer. The layout is simple and compact, and it is easy to install and expand. The controller is wall-mounted, touch panel display with beautiful appearance, it is a high-performance, high-reliability and intelligent fire alarm controller.


Parameters
 

Product Name	Addressable Fire Alarm Control Panel	Capacity	1-1524control points, maximum 6 loops
Capacity	Maximum 6 loops	Main power supply	AC220V± 15%, 2.5A, 50HZ.
Battery power supply	DC 24V (2 sealed batteries: 2*12V*7Ah)	Loop Bus wired	Non-polarity 2 wired.
LCD	Touch panel, Networkable, Colored LCD	Operating Environment	Temperature -10°C~+50°C  Humidity ≤95%.
Dimentions	400mm×500mm×125mm.	Certification	CE

Main Functions

1. System self-test function. The system will test indicator light, LCD screen, sounder etc.
2. Inquiry function. Check model type zone number, device definition etc.
3. Event record. Record the fire alarm information and other operation record.
4. Data sampling.  Data analysis.
5. Setting function. Set the password, time, printer information.
6. Install and programming. Address coding, Login, Logical programming
7. Feedback function. Give real-time feedback information after starting the equipment.
8. Faulty alarm function. Automatically check the working status of main power supply, battery power supply, detectors , modules and report the detail fault information.

 
Connection Diagram

Product Range

Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector

Service

1. OEM &ODM service.
2. Provide special technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.

Conpany Profile


Assembly Line


Burn-in Room

Quality Management System